- Article no.: 63050
- Manufacturer no.: 63050
- EAN: 4049469037093
- Weight: 0,028 kg
> 50 k dispozici na skladě
13mm barb fitting made from nickel coated brass with O-ring seal for PVC, PU, PA, silicone or PE...more
Product Information
13mm barb fitting made from nickel coated brass with O-ring seal for PVC, PU, PA, silicone or PE hoses with an inner diameter of 11-13mm. G3/8" outer thread. The hose must be fixated with a zip tie or hose clamp. Inner diameter of fitting: 10mm.
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Technical details and videos ... moor
Technical details
otočné: | Ne |
Materiál: | Mosaz |
kompatibilita: | weiche Schläuche (PVC, Silikon, Neoprene), harte Schläuche (PUR) |
specifikace: | Tvar: rovný |
Výrobce: | Aquatuning |
2. Strana: | G3/8" vnější závit |
Délka závitu: | 7-8mm |
1. Strana: | Nástrčné fitinky 12 & 13mm (1/2") |
Barva: | nickel |
Questions & Answers more
Questions & Answers
Zatím nebyla položena žádná otázka.
Read, write and discuss reviews...more
Reviews
5 Hvězdy:
(0)
4 Hvězdy:
(0)
3 Hvězdy:
(0)
2 Hvězdy:
(0)
1 Hvězdy:
(0)
-13%
-44%
Content
300 cm
(75,78 CZK
* / 100 cm)
227,34 CZK
*
-17%