
- Article no.: 63052
- Manufacturer no.: 63052
- EAN: 4049469039608
- Weight: 0,013 kg
> 250 k dispozici na skladě
13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner...more
Product Information
13mm barbed fitting made from nickel coated brass with O-ring seal for hoses with an inner diameter of 11-13mm .
Inner diameter of connector: 13mm
This hose connector was specially designed for Highflow systems.
Note: For safety reasons we recommend the use of zip ties or hose clamps for additional hose fixation.
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Inner diameter of connector: 13mm
This hose connector was specially designed for Highflow systems.
Note: For safety reasons we recommend the use of zip ties or hose clamps for additional hose fixation.
Note for watercooling beginners:
The connectors for imperial hoses(7/16", 3/8", ½") are provided with measurements in mm in our shop. These can differ by +-1mm, which is no problem as hose clamps have to be used for installation. If the hose is to be mounted without a clamp, a larger fitting should be chosen. With some fittings that tend to be larger, it is possible though that a hose with an inner diameter of 13mm actually does seal without a hose clamp.
Overview:
10mm (3/8") hose clamp: up to 8mm none, from 10mm up required
10mm (7/16") hose clamp: up to 8mm none, from 10mm up required
12mm (1/2") hose clamp: up to 11mm none, from 12mm up required
13mm (1/2") hose clamp: up to 11mm none, from 13mm up required
Technical details and videos ... moor
Technical details
otočné: | Ne |
Materiál: | Mosaz |
kompatibilita: | weiche Schläuche (PVC, Silikon, Neoprene), harte Schläuche (PUR) |
specifikace: | Tvar: rovný |
Výrobce: | Aquatuning |
2. Strana: | G1/8" vnější závit |
Délka závitu: | 7-8mm |
1. Strana: | Nástrčné fitinky 12 & 13mm (1/2") |
Barva: | nickel |
Questions & Answers more
Questions & Answers
Zatím nebyla položena žádná otázka.
Read, write and discuss reviews...more
Reviews
5 Hvězdy:
(0)
4 Hvězdy:
(0)
3 Hvězdy:
(0)
2 Hvězdy:
(0)
1 Hvězdy:
(0)
Content
30 cm
(273,30 CZK
* / 100 cm)
81,99 CZK
*
Content
300 cm
(225,64 CZK
* / 100 cm)
676,92 CZK
*
-80%
Content
30 cm
(111,80 CZK
* / 100 cm)
33,54 CZK
*
167,71 CZK
*
-11%
Content
330 cm
(38,60 CZK
* / 100 cm)
127,39 CZK
*